Kenwood MJ919
| Name | MJ919 |
|---|---|
| Manufacturer | Kenwood |
| Released | 2000/02 |
| Device type | auto |
| Recorder | Player |
| MDLP | No |
| NetMD | No |
| Hi-MD | No |
| Radio | Yes |
| Dimensions | 1-Din 178 (W) x 50 (H) x 160 (D) mm |
| Weight | 1400 |
| ATRAC ver | |
| Battery | |
| Sidecar battery | |
| Voltage | 12 |
| Power cable | |
| Price (launch) | |
| ¥73 500 |
|
| - | |
| Inputs | |
| Outputs | |
| Control |
The Kenwood MJ919 is a 3+1 MD changer in 1DIN size. Equipped with a “3 mode font” function that allows you to select from 3 types of display fonts. A multifunctional full-dot FL tube is used for the display, enabling beautiful and precise display. In addition, in order to achieve MD playback sound quality suitable for the highest peak of Kenwood car components, it is equipped with “24bit RESOLUTION MD”, which has separate circuit configurations for ATRAC and DAC. It achieves MD sound quality of single item quality that surpasses the sound quality of CD. A hybrid IC “System E's PRO” that reduces sound distortion and an ultra-high power amplifier of 45W x 4ch realize sound quality suitable for a digital hybrid component.
[MD department]
- Frequency response: 20Hz to 20kHz (±1dB)
- S/N ratio: 98dB (1kHz)
- Dynamic range: 98dB
- Stereo Separation: 92dB
[FM section]
- Receiving frequency range: 76.0MHz to 90.0MHz (100kHz steps)
[AM section]
- Receiving frequency range: 522kHz to 1629kHz (9kHz steps) Sensitivity: 28dBμ
[Audio part]
- Maximum output: 45W x 4
- Rated output: 28W x 4 (4Ω, 1kHz, 10%THD)
- Pre-out level: 1500mV (FM/10kΩ)
[Common part]
- Power supply voltage: 14.4V (11 to 16V)
- Maximum current consumption: 10A
- Embedded dimensions: 178 (W) x 50 (H) x 160 (D) mm
- Mass: 1.4kg
Content adapted from: Kenwood Press Release (archived)
Manuals
Repair
Photos
Submit your own! Edit the page, use the photo submission form, or Contact us.